Carbon fibre UD non-crimp fabrics

In carbon uni-directional non-crimp fabrics the carbon fibres used are arranged in a single direction and are held together by a PES support thread (ca. 3 g/m²). A smooth, even surface is thus achieved. The UD non-crimp fabrics are wound together with a PE release film, which can also be used for pre-impregnation. They are available in widths from 5 to approx. 65 cm and are also available in high-modulus (HM) carbon fibres.

  • full use of the fibre properties

  • high fibre content possible

  • UD non-crimp fabrics leave no fibre imprint on the surfaces

  • good performance when die-cutting, any desired blanks can be produced without waste or fraying

UD non-crimp fabrics HT carbon fibre

Style C-1: support thread on one side

Style C-2: support thread on both sides

Areal weight [g/m²]

Width [mm]

Style

80

600

UD C-1- 80/600

100

300

UD C-1- 100/300

200

50

UD C-1- 200/50

200

300

UD C-1- 200/300

300

50

UD C-1- 300/50

300

300

UD C-2- 300/300

400

200

UD C-2- 400/200

600

550

UD C-2- 600/550

further items available on request

UD non-crimp fabrics ultra-high-modulus carbon fibre

fibre: Dialead K63712, support thread on both sides

Areal weight [g/m²]

Width [mm]

Style

250

244

HM UD C-2- 250

450

635

HM UD C-2-450/635

450

100/200

HM UD C-2-450/100 (200)

further items available on request

Carbon fibre UD fabric

Areal weight [g/m²]

Weave

Yarn

Width [cm]

style

134

UD spread, twill 1/3

IM

127

KUD134IM

140

UD, plain

warp: 3K carbon fibre(120 g/m²), weft: E-glass (17 g/m²)

100

KUD140

194

UD spread, twill 1/3

IM

127

KUD194IM

further items available on request